How to Remove Shower Head that is glued on without Scratching
Removing shower head that is glued on when renovating your bathroom to update your bathtub fixtures is something we may all have to eventually do. If your old showerhead is outdated and you want to replace it with a more modern energy-saving showerhead or your showerhead is leaking and needs your immediate attention for removal, don’t panic.
However, if for some reason you are a bit intimidated by the thought of replacing your bathtub hardware, fear no more because this is a do-it-yourself shower head replacement guide that teaches you how to easily remove your existing showerhead. I will be showing you all the steps you need to take to remove shower head that is glued on without scratching.
The great thing about removing a showerhead when renovating your bathroom is that there is no need to spend your hard-earned dollars to hire a seasoned plumber to remove the showerhead. All you have to do is follow these few simple showerhead removal steps that will cost you next to nothing to get the job done right the first time.
Removing a showerhead that is glued on when renovating your bathroom is an easy way to spruce up your bathing area with minimal cost to you. The tools required for unloosening and removing a showerhead when renovating your bathing area are everyday household tools that are probably already lying around in your toolbox. The steps to removing a showerhead when renovating your bath can be done by anyone without the assistance of a plumber.
This do-it-yourself showerhead disconnection reference guide is quite basic but requires a few simple plumbing tools to successfully remove your showerhead. Take a deep breath, there is no need for anxiety because the equipment required for unloosening and removing a showerhead when renovating are everyday household tools that are probably already lying around in your toolbox just waiting for you to use.
Looking for Shower Head That Can Increase Water Pressure? Here are the best.
Gather the plumbing tools you currently have or make a list of the tools that you will probably need to purchase at your local home improvement or hardware store and you will be a step closer to rid yourself of that old tarnished dripping showerhead.
Here is what you are going to need to remove your showerhead when renovating your bathroom:
- Screwdriver
- Pipe Wrench
- Channel locks (optional)
- Masking Tape (optional)
- Wire brush (optional)
- Toothbrush (optional)
When removing a shower head if you are renovating your bathroom, keep in mind that some showerheads can be easily unscrewed without the use of any equipment at all. If this is the case, read the following showerhead removal section about safety and by all means, use your hands to screw the showerhead off the water pipe. However, this do-it-yourself guide has highlighted a specific set of tools to prepare you if your showerhead might be securely fastened to the water pipe.
Cautionary Steps to Take before Showerhead Removal Starts
Depending on your type of showerhead, before you begin working on the removal of the shower-head, for safety reasons, it would be best for you to find your household’s central switch-box and cut the electricity to the bathroom.
Some modern-day showerheads are directly linked to an electrical system that provides flash heat; by cutting off any electrical power, you will be protecting yourself from any possible mishaps so read the manual that came with your showerhead unit or go online to the manufacturer’s site and find the appropriate removal instructions.
In the event of an unlikely break in the water pipes when removing your showerhead, it would also be a good idea to similarly shut off your water supply. If the waterline does break, this preventative safety measure could save you from paying a hefty utility bill or unnecessary water damage to your bathroom. Without further ado, let’s get into the actual removal of the showerhead.
Directions on how to remove Your Showerhead that is glued on with wrench and Teflon tape without scratching
First off, check to see if your showerhead is fastened unto the water supply by small screws. If this is the case, get your screwdriver and begin loosening the screws. If the showerhead is firmly fastened and secured unto the water supply by couplings, this is where the pipe wrench or channel locks come in handy to remove the showerhead.
When removing your showerhead, whichever wrench you choose, it is always a good idea to layer the surface of the jaws with masking tape. If the showerhead to be removed is old, the tape is not necessary, but if the showerhead is being removed for minor repairs, then the masking tape will prevent any surface damage to the finish of the showerhead.
After placing the tape on the jaws of the wrench, begin turning counter-clockwise (this is the direction to loosen the showerhead) and the coupling should be loose with little effort. With showerhead removal, this is not a job to be done in haste, be patient and extremely careful when loosening the showerhead, for turning the coupling too fast can cause damage to wall-surfaces or even a break in the piping so take your time and apply steady even pressure to remove the showerhead.
The removal of the showerhead is your main objective, but accomplishing the mission needs a little more effort. After the disconnection of the showerhead, use a wire brush or toothbrush to remove pieces of Teflon tape left behind from the water-supply nozzle that had been previously put in place.
Such materials like Teflon are often used to wrap the threaded ends of pipes to reduce friction as well as ensure water tightness. The Teflon should be removed so that a fresh batch may be placed when reattaching your new showerhead.
Now that you have completed this easy do-it-yourself showerhead project, any intimidation previously felt towards the disconnection and removal of your shower-head should be long gone. This standard showerhead removal guide is solely built for your assistance; this tutorial is basic, to the point, and will surely help you to get the job done at little or no cost at all.
Stop wasting time and begin that shower removal job you have been putting off. Remodeling your bathroom with a new shower head is a simple and easy way to spruce up your bathing area with minimal cost to you.
Looking for Water-saving shower heads? Here are the best.